Wood Fence costs $20.27 to $50.68 per linear ft in Bellingham in 2026. For a 150-foot run, expect $3,041 – $7,602 installed, typically near $5,321. That is essentially in line with the Washington average.
Bellingham wood fence calculator
Planning estimate. Wage index applies to the labor share only; materials held at national prices. Get three written quotes.
How Bellingham compares with the rest of Washington
Construction wages in Bellingham average $39.38 per hour against $39.60 statewide, so pricing tracks the Washington norm closely.
Labor is about 50% of the installed cost on this type of work, and it is the part that actually moves between markets. Materials are priced by national manufacturers and barely shift, which is why the gap between metros is narrower than wage differences alone suggest.
Wood Fence cost by project size in Bellingham
| Project size | Bellingham range | Typical |
|---|---|---|
| 50 ft | $1,014 – $2,534 | $1,774 |
| 100 ft | $2,027 – $5,068 | $3,548 |
| 150 ft | $3,041 – $7,602 | $5,321 |
| 200 ft | $4,054 – $10,136 | $7,095 |
| 250 ft | $5,068 – $12,670 | $8,869 |
| 300 ft | $6,082 – $15,204 | $10,643 |
| 400 ft | $8,109 – $20,272 | $14,190 |
| 500 ft | $10,136 – $25,340 | $17,738 |
Where the money goes
For a 150-foot run in Bellingham at roughly $5,321, a typical bill splits like this:
| Line item | Share | Cost |
|---|---|---|
| Labor | 50% | $2,661 |
| Materials | 36% | $1,916 |
| Site prep & equipment | 8% | $426 |
| Overhead, disposal & finishing | 6% | $319 |
Bellingham compared with other Washington markets
| Area | Cost per linear ft | vs Bellingham |
|---|---|---|
| Seattle | $21.05 – $52.64 | +4% |
| Spokane | $18.88 – $47.19 | −7% |
| Kennewick | $20.43 – $51.08 | +1% |
| Bremerton | $19.94 – $49.86 | −2% |
| Washington average | $20.34 – $50.85 | 0% |
Ground conditions and code in Bellingham
Permits in Bellingham
A residential permit for this work typically runs around $700 in Washington. Permit cost is rarely included in a contractor quote, so budget it separately and confirm scope with the Bellingham building department before work begins.
Hiring in Bellingham
Get three written, itemised quotes from licensed and insured contractors, each specifying the same scope and grade of material. Ask for local references and check the licence is current in Washington.
Frequently asked questions
How much does wood fence cost in Bellingham?
In 2026, wood fence costs $20.27 to $50.68 per linear ft in Bellingham. For a 150-foot run, the installed total typically lands between $3,041 and $7,602.
Is Bellingham more expensive than the rest of Washington?
Not meaningfully. Bellingham prices track the Washington average closely.
Do I need a permit in Bellingham?
Most work of this type and value requires a permit. Budget around $700 in Washington and allow extra time for review in metro jurisdictions.
How do I compare quotes in Bellingham?
Get three written, itemised quotes covering identical scope and materials. A bid far below the others usually signals a reduced specification rather than better value.
Nearby markets
Open the full wood fence calculator →