Metal Roof costs $9.38 to $22.92 per sq ft in Albany in 2026. For a 400 sq ft project, expect $3,751 – $9,169 installed, typically near $6,460. That is about 4% below the New York average.
Albany metal roof calculator
Planning estimate. Wage index applies to the labor share only; materials held at national prices. Get three written quotes.
Why Albany runs below the New York average
Construction wages in Albany average $34.06 per hour against $36.85 statewide. Albany sits below the New York average because the statewide figure is pulled up by higher-wage metros elsewhere in the state.
Labor is about 50% of the installed cost on this type of work, and it is the part that actually moves between markets. Materials are priced by national manufacturers and barely shift, which is why the gap between metros is narrower than wage differences alone suggest.
Metal Roof cost by project size in Albany
| Project size | Albany range | Typical |
|---|---|---|
| 100 sq ft | $938 – $2,292 | $1,615 |
| 200 sq ft | $1,875 – $4,584 | $3,230 |
| 300 sq ft | $2,813 – $6,877 | $4,845 |
| 400 sq ft | $3,751 – $9,169 | $6,460 |
| 600 sq ft | $5,626 – $13,753 | $9,690 |
| 800 sq ft | $7,502 – $18,338 | $12,920 |
| 1,000 sq ft | $9,377 – $22,922 | $16,150 |
| 1,500 sq ft | $14,066 – $34,384 | $24,225 |
Where the money goes
For a 400 sq ft project in Albany at roughly $6,460, a typical bill splits like this:
| Line item | Share | Cost |
|---|---|---|
| Labor | 50% | $3,230 |
| Materials | 36% | $2,326 |
| Site prep & equipment | 8% | $517 |
| Overhead, disposal & finishing | 6% | $388 |
Albany compared with other New York markets
| Area | Cost per sq ft | vs Albany |
|---|---|---|
| New York | $10.16 – $24.83 | +8% |
| Buffalo | $9.18 – $22.44 | −2% |
| Rochester | $9.15 – $22.37 | −2% |
| Syracuse | $9.23 – $22.56 | −2% |
| New York average | $9.78 – $23.90 | +4% |
Ground conditions and code in Albany
Permits in Albany
A residential permit for this work typically runs around $800 in New York. Permit cost is rarely included in a contractor quote, so budget it separately and confirm scope with the Albany building department before work begins.
Hiring in Albany
Get three written, itemised quotes from licensed and insured contractors, each specifying the same scope and grade of material. Ask for local references and check the licence is current in New York.
Frequently asked questions
How much does metal roof cost in Albany?
In 2026, metal roof costs $9.38 to $22.92 per sq ft in Albany. For a 400 sq ft project, the installed total typically lands between $3,751 and $9,169.
Is Albany more expensive than the rest of New York?
No. Albany actually runs about 4% below the New York average. Local construction wages are $34.06/hr against $36.85/hr statewide.
Do I need a permit in Albany?
Most work of this type and value requires a permit. Budget around $800 in New York and allow extra time for review in metro jurisdictions.
How do I compare quotes in Albany?
Get three written, itemised quotes covering identical scope and materials. A bid far below the others usually signals a reduced specification rather than better value.
Nearby markets
Open the full metal roof calculator →