Vinyl Fence costs $29.52 to $63.26 per linear ft in St. Cloud in 2026. For a 150-foot run, expect $4,428 – $9,489 installed, typically near $6,958. That is essentially in line with the Minnesota average.
St. Cloud vinyl fence calculator
Planning estimate. Wage index applies to the labor share only; materials held at national prices. Get three written quotes.
How St. Cloud compares with the rest of Minnesota
Construction wages in St. Cloud average $35.47 per hour against $36.13 statewide, so pricing tracks the Minnesota norm closely.
Labor is about 42% of the installed cost on this type of work, and it is the part that actually moves between markets. Materials are priced by national manufacturers and barely shift, which is why the gap between metros is narrower than wage differences alone suggest.
Vinyl Fence cost by project size in St. Cloud
| Project size | St. Cloud range | Typical |
|---|---|---|
| 50 ft | $1,476 – $3,163 | $2,319 |
| 100 ft | $2,952 – $6,326 | $4,639 |
| 150 ft | $4,428 – $9,489 | $6,958 |
| 200 ft | $5,904 – $12,652 | $9,278 |
| 250 ft | $7,380 – $15,815 | $11,597 |
| 300 ft | $8,856 – $18,978 | $13,917 |
| 400 ft | $11,808 – $25,303 | $18,556 |
| 500 ft | $14,760 – $31,629 | $23,195 |
Where the money goes
For a 150-foot run in St. Cloud at roughly $6,958, a typical bill splits like this:
| Line item | Share | Cost |
|---|---|---|
| Labor | 42% | $2,923 |
| Materials | 44% | $3,062 |
| Site prep & equipment | 8% | $557 |
| Overhead, disposal & finishing | 6% | $418 |
St. Cloud compared with other Minnesota markets
| Area | Cost per linear ft | vs St. Cloud |
|---|---|---|
| Minneapolis | $30.40 – $65.14 | +3% |
| Duluth | $29.11 – $62.39 | −1% |
| Rochester | $29.64 – $63.52 | 0% |
| Mankato | $29.20 – $62.56 | −1% |
| Minnesota average | $29.76 – $63.78 | +1% |
Ground conditions and code in St. Cloud
Permits in St. Cloud
A residential permit for this work typically runs around $500 in Minnesota. Permit cost is rarely included in a contractor quote, so budget it separately and confirm scope with the St. Cloud building department before work begins.
Hiring in St. Cloud
Get three written, itemised quotes from licensed and insured contractors, each specifying the same scope and grade of material. Ask for local references and check the licence is current in Minnesota.
Frequently asked questions
How much does vinyl fence cost in St. Cloud?
In 2026, vinyl fence costs $29.52 to $63.26 per linear ft in St. Cloud. For a 150-foot run, the installed total typically lands between $4,428 and $9,489.
Is St. Cloud more expensive than the rest of Minnesota?
Not meaningfully. St. Cloud prices track the Minnesota average closely.
Do I need a permit in St. Cloud?
Most work of this type and value requires a permit. Budget around $500 in Minnesota and allow extra time for review in metro jurisdictions.
How do I compare quotes in St. Cloud?
Get three written, itemised quotes covering identical scope and materials. A bid far below the others usually signals a reduced specification rather than better value.
Nearby markets
Open the full vinyl fence calculator →