Chain Link Fence costs $12.11 to $30.27 per linear ft in Texas in 2026. For a 150-foot run, that puts the installed total at $1,816 – $4,541, with most projects landing near $3,178. Texas is essentially in line with the national average.
Why Texas prices differ from the national average
Roughly 45% of the installed cost of chain link fence is labor, and labor is the part of the bill that actually moves between states. Texas construction wages average $37.71 per hour against a national figure near $36.97 — a wage index of 1.02×.
Materials behave differently. Fence panels, posts, rails, and hardware are priced by national manufacturers and distributors, so material costs barely move from one state to the next. That is why we apply the wage index only to the labor share and hold materials at national prices. Doing that puts Texas at $12.11 to $30.27 per linear ft, against a national baseline of $12.00 to $30.00.
Two other forces sit on top of that. Metro areas inside Texas price above the statewide figure because of wages, permitting, and site access. And a moderate frost line adds some excavation depth to footings and posts.
Chain Link Fence cost by project size in Texas
These figures apply the Texas rate to common project sizes. They cover a standard specification with normal site access.
| Project size | Texas cost range | Typical |
|---|---|---|
| 50 ft | $605 – $1,514 | $1,059 |
| 100 ft | $1,211 – $3,027 | $2,119 |
| 150 ft | $1,816 – $4,541 | $3,178 |
| 200 ft | $2,422 – $6,054 | $4,238 |
| 250 ft | $3,027 – $7,568 | $5,297 |
| 300 ft | $3,632 – $9,081 | $6,357 |
| 400 ft | $4,843 – $12,108 | $8,476 |
| 500 ft | $6,054 – $15,135 | $10,595 |
Where the money actually goes
For a 150-foot run in Texas at roughly $3,178, a typical bill splits like this:
| Line item | Share | Cost |
|---|---|---|
| Labor | 45% | $1,430 |
| Materials | 41% | $1,311 |
| Site prep & equipment | 8% | $262 |
| Overhead, disposal & finishing | 6% | $175 |
The labor share is why identical projects diverge so sharply between states. It is also why a bid that comes in far below these numbers usually means a thinner specification or a crew cutting site prep, not a genuine bargain.
Chain Link Fence cost by city in Texas
Statewide averages hide a lot. Houston, Dallas, Austin all price above the Texas average, while rural counties run below it:
| Area | Cost per linear ft | A 150-foot run | vs state |
|---|---|---|---|
| Houston | $13.08 – $32.69 | $3,433 | +8% |
| Dallas | $13.32 – $33.30 | $3,496 | +10% |
| Austin | $13.80 – $34.51 | $3,623 | +14% |
| Rural Texas | $11.26 – $28.15 | $2,956 | −7% |
What is included in a Texas quote — and what is not
A complete quote for this work should list dimensions, specification and grade, site preparation, materials, labor, cleanup, and disposal. Those are the items already reflected in the ranges above.
Costs that usually sit outside the headline number: permits (around $450 in Texas), demolition or removal of existing work, unusual site access, drainage or grading corrections, and any upgrade to the standard specification. When two bids differ by thousands, the gap is nearly always one of these, not the labor rate.
Frost depth and code requirements in Texas
Permits in Texas
A residential permit for work of this type and value in Texas typically runs around $450, though the figure varies by municipality and often scales with declared project value. Permit cost is rarely folded into a contractor’s per-linear ft quote, so add it separately when comparing bids. Confirm requirements with your local building department before work begins — unpermitted work can surface later during a sale or insurance claim.
Best time of year to schedule in Texas
Texas allows year-round work, so there is no hard seasonal shutdown. The practical constraints are summer heat, which can force early-morning pours and rain delays in the wet season. Late autumn and winter are often the quietest and cheapest times to book a crew.
DIY versus hiring a contractor in Texas
Materials account for roughly 55% of the installed price, so a 150-foot run carries about $1,748 in materials against an installed cost near $3,178. The gap is labor, equipment, and the risk of getting it wrong.
Because Texas labor runs at 1.02× the national rate, the DIY saving here is closer to the national norm. Weigh it against tool rental, waste disposal, permit responsibility, and the fact that remedial work almost always costs more than doing it right the first time.
How Texas compares with nearby states
Texas sits in the South region. Here is how neighbouring states price the same specification:
| State | Cost per linear ft | vs Texas |
|---|---|---|
| Mississippi | $11.03 – $27.57 | Lower than Texas |
| Arkansas | $11.08 – $27.71 | Lower than Texas |
| Alabama | $11.14 – $27.84 | Lower than Texas |
| West Virginia | $11.24 – $28.11 | Lower than Texas |
| Oklahoma | $11.30 – $28.25 | Lower than Texas |
| Kentucky | $11.35 – $28.38 | Lower than Texas |
Getting an accurate number for your project
Everything above is a planning range. Enter your real dimensions and specification to get a figure with Texas rates already applied:
Open the chain link fence calculator →Then get three written, itemised quotes. Make sure each one specifies the same dimensions and the same grade of material — that is the only way a comparison means anything.
Frequently asked questions
How much does chain link fence cost in Texas?
In 2026, chain link fence costs $12.11 to $30.27 per linear ft in Texas. For a 150-foot run, the installed total typically lands between $1,816 and $4,541, with most projects near $3,178.
Is chain link fence more expensive in Texas than the national average?
Texas is essentially in line with the national average. The driver is a construction wage index of 1.02 times the national figure, applied to the roughly 45% of the project cost that is labor.
Which parts of Texas are most expensive?
Houston, Dallas, and Austin price above the statewide average because of higher wages, stricter permitting, and tighter site access. Rural counties typically run around 7% below the state figure.
Do I need a permit in Texas?
Most municipalities in Texas require a permit for work of this type and value. Budget around $450 and confirm with your local building department before work starts, since requirements vary between cities and counties.
How deep is the frost line in Texas?
The frost line in Texas is roughly 6 inches. Footings and posts must extend below that depth to avoid frost heave, which adds excavation and material to the job.
When is the cheapest time to book this work in Texas?
Texas allows year-round work, so there is no hard seasonal shutdown. The practical constraints are summer heat, which can force early-morning pours and rain delays in the wet season. Late autumn and winter are often the quietest and cheapest times to book a crew.
How much of the cost is labor versus materials?
Labor is about 45% of the installed price and materials about 55%. That split is why state wage differences move the total so much, and why material price swings move it less than people expect.
Why do contractor quotes in Texas vary so much?
Three things move a quote most: metro versus rural location, site access and preparation, and the specification itself. Two bids are only comparable when both list the same dimensions, the same grade of material, and the same scope of prep work.