Wood Fence costs $18.45 to $46.12 per linear ft in Pennsylvania in 2026. For a 150-foot run, that puts the installed total at $2,768 – $6,919, with most projects landing near $4,843. Pennsylvania is about 2% above the national average.
Why Pennsylvania prices differ from the national average
Roughly 50% of the installed cost of wood fence is labor, and labor is the part of the bill that actually moves between states. Pennsylvania construction wages average $38.82 per hour against a national figure near $36.97 — a wage index of 1.05×.
Materials behave differently. Fence panels, posts, rails, and hardware are priced by national manufacturers and distributors, so material costs barely move from one state to the next. That is why we apply the wage index only to the labor share and hold materials at national prices. Doing that puts Pennsylvania at $18.45 to $46.12 per linear ft, against a national baseline of $18.00 to $45.00.
Two other forces sit on top of that. Metro areas inside Pennsylvania price above the statewide figure because of wages, permitting, and site access. And the state’s deep frost line adds excavation and below-grade volume that southern states never pay for.
Wood Fence cost by project size in Pennsylvania
These figures apply the Pennsylvania rate to common project sizes. They cover a standard specification with normal site access.
| Project size | Pennsylvania cost range | Typical |
|---|---|---|
| 50 ft | $923 – $2,306 | $1,614 |
| 100 ft | $1,845 – $4,612 | $3,229 |
| 150 ft | $2,768 – $6,919 | $4,843 |
| 200 ft | $3,690 – $9,225 | $6,457 |
| 250 ft | $4,613 – $11,531 | $8,072 |
| 300 ft | $5,535 – $13,837 | $9,686 |
| 400 ft | $7,380 – $18,450 | $12,915 |
| 500 ft | $9,225 – $23,062 | $16,144 |
Where the money actually goes
For a 150-foot run in Pennsylvania at roughly $4,843, a typical bill splits like this:
| Line item | Share | Cost |
|---|---|---|
| Labor | 50% | $2,422 |
| Materials | 38% | $1,816 |
| Site prep & equipment | 8% | $363 |
| Overhead, disposal & finishing | 5% | $242 |
The labor share is why identical projects diverge so sharply between states. It is also why a bid that comes in far below these numbers usually means a thinner specification or a crew cutting site prep, not a genuine bargain.
Wood Fence cost by city in Pennsylvania
Statewide averages hide a lot. Philadelphia, Pittsburgh, Allentown all price above the Pennsylvania average, while rural counties run below it:
| Area | Cost per linear ft | A 150-foot run | vs state |
|---|---|---|---|
| Philadelphia | $21.40 – $53.50 | $5,618 | +16% |
| Pittsburgh | $19.56 – $48.89 | $5,134 | +6% |
| Allentown | $19.19 – $47.97 | $5,037 | +4% |
| Rural Pennsylvania | $17.16 – $42.90 | $4,504 | −7% |
What is included in a Pennsylvania quote — and what is not
A complete quote for this work should list dimensions, specification and grade, site preparation, materials, labor, cleanup, and disposal. Those are the items already reflected in the ranges above.
Costs that usually sit outside the headline number: permits (around $500 in Pennsylvania), demolition or removal of existing work, unusual site access, drainage or grading corrections, and any upgrade to the standard specification. When two bids differ by thousands, the gap is nearly always one of these, not the labor rate.
Frost depth and code requirements in Pennsylvania
Permits in Pennsylvania
A residential permit for work of this type and value in Pennsylvania typically runs around $500, though the figure varies by municipality and often scales with declared project value. Permit cost is rarely folded into a contractor’s per-linear ft quote, so add it separately when comparing bids. Confirm requirements with your local building department before work begins — unpermitted work can surface later during a sale or insurance claim.
Best time of year to schedule in Pennsylvania
Pennsylvania has a solid working season from spring through late autumn, with a genuine winter slowdown. Demand peaks in late spring and early summer, which is also when quotes are highest. Scheduling in early spring or after the autumn rush often saves money.
DIY versus hiring a contractor in Pennsylvania
Materials account for roughly 50% of the installed price, so a 150-foot run carries about $2,422 in materials against an installed cost near $4,843. The gap is labor, equipment, and the risk of getting it wrong.
Because Pennsylvania labor runs at 1.05× the national rate, the DIY saving here is closer to the national norm. Weigh it against tool rental, waste disposal, permit responsibility, and the fact that remedial work almost always costs more than doing it right the first time.
How Pennsylvania compares with nearby states
Pennsylvania sits in the Northeast region. Here is how neighbouring states price the same specification:
| State | Cost per linear ft | vs Pennsylvania |
|---|---|---|
| Maine | $17.73 – $44.33 | Lower than Pennsylvania |
| Vermont | $17.82 – $44.55 | Lower than Pennsylvania |
| Delaware | $18.36 – $45.90 | Lower than Pennsylvania |
| New Hampshire | $18.36 – $45.90 | Lower than Pennsylvania |
| Rhode Island | $18.63 – $46.58 | Higher than Pennsylvania |
| Maryland | $18.72 – $46.80 | Higher than Pennsylvania |
Getting an accurate number for your project
Everything above is a planning range. Enter your real dimensions and specification to get a figure with Pennsylvania rates already applied:
Open the wood fence calculator →Then get three written, itemised quotes. Make sure each one specifies the same dimensions and the same grade of material — that is the only way a comparison means anything.
Frequently asked questions
How much does wood fence cost in Pennsylvania?
In 2026, wood fence costs $18.45 to $46.12 per linear ft in Pennsylvania. For a 150-foot run, the installed total typically lands between $2,768 and $6,919, with most projects near $4,843.
Is wood fence more expensive in Pennsylvania than the national average?
Pennsylvania is about 2% above the national average. The driver is a construction wage index of 1.05 times the national figure, applied to the roughly 50% of the project cost that is labor.
Which parts of Pennsylvania are most expensive?
Philadelphia, Pittsburgh, and Allentown price above the statewide average because of higher wages, stricter permitting, and tighter site access. Rural counties typically run around 7% below the state figure.
Do I need a permit in Pennsylvania?
Most municipalities in Pennsylvania require a permit for work of this type and value. Budget around $500 and confirm with your local building department before work starts, since requirements vary between cities and counties.
How deep is the frost line in Pennsylvania?
The frost line in Pennsylvania is roughly 36 inches. Footings and posts must extend below that depth to avoid frost heave, which adds excavation and material to the job.
When is the cheapest time to book this work in Pennsylvania?
Pennsylvania has a solid working season from spring through late autumn, with a genuine winter slowdown. Demand peaks in late spring and early summer, which is also when quotes are highest. Scheduling in early spring or after the autumn rush often saves money.
How much of the cost is labor versus materials?
Labor is about 50% of the installed price and materials about 50%. That split is why state wage differences move the total so much, and why material price swings move it less than people expect.
Why do contractor quotes in Pennsylvania vary so much?
Three things move a quote most: metro versus rural location, site access and preparation, and the specification itself. Two bids are only comparable when both list the same dimensions, the same grade of material, and the same scope of prep work.