Metal Roof costs $9.53 to $23.29 per sq ft in Milwaukee in 2026. For a 400 sq ft project, expect $3,811 – $9,315 installed, typically near $6,563. That is about 2% above the Wisconsin average.
Milwaukee metal roof calculator
Planning estimate. Wage index applies to the labor share only; materials held at national prices. Get three written quotes.
Why Milwaukee runs above the Wisconsin average
Construction wages in Milwaukee average $35.09 per hour against $33.56 statewide, so labor-heavy work prices above the Wisconsin norm here.
Labor is about 50% of the installed cost on this type of work, and it is the part that actually moves between markets. Materials are priced by national manufacturers and barely shift, which is why the gap between metros is narrower than wage differences alone suggest.
Metal Roof cost by project size in Milwaukee
| Project size | Milwaukee range | Typical |
|---|---|---|
| 100 sq ft | $953 – $2,329 | $1,641 |
| 200 sq ft | $1,905 – $4,658 | $3,282 |
| 300 sq ft | $2,858 – $6,987 | $4,922 |
| 400 sq ft | $3,811 – $9,315 | $6,563 |
| 600 sq ft | $5,716 – $13,973 | $9,845 |
| 800 sq ft | $7,622 – $18,631 | $13,126 |
| 1,000 sq ft | $9,527 – $23,288 | $16,408 |
| 1,500 sq ft | $14,291 – $34,933 | $24,612 |
Where the money goes
For a 400 sq ft project in Milwaukee at roughly $6,563, a typical bill splits like this:
| Line item | Share | Cost |
|---|---|---|
| Labor | 50% | $3,282 |
| Materials | 36% | $2,363 |
| Site prep & equipment | 8% | $525 |
| Overhead, disposal & finishing | 6% | $394 |
Milwaukee compared with other Wisconsin markets
| Area | Cost per sq ft | vs Milwaukee |
|---|---|---|
| Madison | $9.53 – $23.29 | 0% |
| Green Bay | $9.25 – $22.62 | −3% |
| Appleton | $9.53 – $23.29 | 0% |
| Oshkosh | $9.53 – $23.30 | 0% |
| Wisconsin average | $9.31 – $22.75 | −2% |
Ground conditions and code in Milwaukee
Permits in Milwaukee
A residential permit for this work typically runs around $450 in Wisconsin. Permit cost is rarely included in a contractor quote, so budget it separately and confirm scope with the Milwaukee building department before work begins.
Hiring in Milwaukee
Get three written, itemised quotes from licensed and insured contractors, each specifying the same scope and grade of material. Ask for local references and check the licence is current in Wisconsin.
Frequently asked questions
How much does metal roof cost in Milwaukee?
In 2026, metal roof costs $9.53 to $23.29 per sq ft in Milwaukee. For a 400 sq ft project, the installed total typically lands between $3,811 and $9,315.
Is Milwaukee more expensive than the rest of Wisconsin?
Yes. Milwaukee runs about 2% above the Wisconsin average, because local construction wages ($35.09/hr) sit above the statewide figure of $33.56/hr.
Do I need a permit in Milwaukee?
Most work of this type and value requires a permit. Budget around $450 in Wisconsin and allow extra time for review in metro jurisdictions.
How do I compare quotes in Milwaukee?
Get three written, itemised quotes covering identical scope and materials. A bid far below the others usually signals a reduced specification rather than better value.
Nearby markets
Open the full metal roof calculator →