Chain Link Fence costs $13.83 to $34.58 per linear ft in Tacoma in 2026. For a 150-foot run, expect $2,075 – $5,187 installed, typically near $3,631. That is about 3% above the Washington average.
Tacoma chain link fence calculator
Planning estimate. Wage index applies to the labor share only; materials held at national prices. Get three written quotes.
Why Tacoma runs above the Washington average
Construction wages in Tacoma average $42.11 per hour against $39.60 statewide, so labor-heavy work prices above the Washington norm here.
Labor is about 45% of the installed cost on this type of work, and it is the part that actually moves between markets. Materials are priced by national manufacturers and barely shift, which is why the gap between metros is narrower than wage differences alone suggest.
Chain Link Fence cost by project size in Tacoma
| Project size | Tacoma range | Typical |
|---|---|---|
| 50 ft | $692 – $1,729 | $1,210 |
| 100 ft | $1,383 – $3,458 | $2,421 |
| 150 ft | $2,075 – $5,187 | $3,631 |
| 200 ft | $2,767 – $6,916 | $4,841 |
| 250 ft | $3,458 – $8,645 | $6,052 |
| 300 ft | $4,150 – $10,374 | $7,262 |
| 400 ft | $5,533 – $13,833 | $9,683 |
| 500 ft | $6,916 – $17,291 | $12,104 |
Where the money goes
For a 150-foot run in Tacoma at roughly $3,631, a typical bill splits like this:
| Line item | Share | Cost |
|---|---|---|
| Labor | 45% | $1,634 |
| Materials | 41% | $1,489 |
| Site prep & equipment | 8% | $290 |
| Overhead, disposal & finishing | 6% | $218 |
Tacoma compared with other Washington markets
| Area | Cost per linear ft | vs Tacoma |
|---|---|---|
| Seattle | $13.83 – $34.58 | 0% |
| Spokane | $12.53 – $31.32 | −9% |
| Kennewick | $13.46 – $33.65 | −3% |
| Bremerton | $13.17 – $32.91 | −5% |
| Bellingham | $13.36 – $33.41 | −3% |
| Washington average | $13.40 – $33.51 | −3% |
Ground conditions and code in Tacoma
Permits in Tacoma
A residential permit for this work typically runs around $700 in Washington. Permit cost is rarely included in a contractor quote, so budget it separately and confirm scope with the Tacoma building department before work begins.
Hiring in Tacoma
Get three written, itemised quotes from licensed and insured contractors, each specifying the same scope and grade of material. Ask for local references and check the licence is current in Washington.
Frequently asked questions
How much does chain link fence cost in Tacoma?
In 2026, chain link fence costs $13.83 to $34.58 per linear ft in Tacoma. For a 150-foot run, the installed total typically lands between $2,075 and $5,187.
Is Tacoma more expensive than the rest of Washington?
Yes. Tacoma runs about 3% above the Washington average, because local construction wages ($42.11/hr) sit above the statewide figure of $39.60/hr.
Do I need a permit in Tacoma?
Most work of this type and value requires a permit. Budget around $700 in Washington and allow extra time for review in metro jurisdictions.
How do I compare quotes in Tacoma?
Get three written, itemised quotes covering identical scope and materials. A bid far below the others usually signals a reduced specification rather than better value.
Nearby markets
Open the full chain link fence calculator →