Heat Pump costs $5,384 to $12,726 in Colorado Springs in 2026. For an average 1,800 sq ft home, expect $5,384 – $12,726 installed, typically near $9,055. That is about 2% below the Colorado average.
Colorado Springs heat pump calculator
Planning estimate. Wage index applies to the labour share only; materials held at national prices. Get three written quotes.
Why Colorado Springs runs below the Colorado average
Construction wages in Colorado Springs average $29.69 per hour against $31.67 statewide. Colorado Springs sits below the Colorado average because the statewide figure is pulled up by higher-wage metros elsewhere in the state.
Labour is about 38% of the installed cost on this type of work, and it is the part that actually moves between markets. Materials are priced by national manufacturers and barely shift, which is why the gap between metros is narrower than wage differences alone suggest.
Heat Pump cost by project size in Colorado Springs
| Project size | Colorado Springs range | Typical |
|---|---|---|
| 1,000 sq ft home | $2,991 – $7,070 | $5,031 |
| 1,400 sq ft home | $4,188 – $9,898 | $7,043 |
| 1,800 sq ft home | $5,384 – $12,726 | $9,055 |
| 2,200 sq ft home | $6,580 – $15,554 | $11,067 |
| 2,600 sq ft home | $7,777 – $18,382 | $13,079 |
| 3,000 sq ft home | $8,973 – $21,210 | $15,092 |
Where the money goes
For an average 1,800 sq ft home in Colorado Springs at roughly $9,055, a typical bill splits like this:
| Line item | Share | Cost |
|---|---|---|
| Labour | 38% | $3,441 |
| Materials | 48% | $4,346 |
| Site prep & equipment | 8% | $724 |
| Overhead, disposal & finishing | 6% | $543 |
Colorado Springs compared with other Colorado markets
| Area | Cost installed | vs Colorado Springs |
|---|---|---|
| Denver | $5,605 – $13,249 | +4% |
| Greeley | $5,395 – $12,751 | 0% |
| Northwest Colorado nonmetropolitan area | $5,498 – $12,995 | +2% |
| Southwest Colorado nonmetropolitan area | $5,426 – $12,825 | +1% |
| Colorado average | $5,517 – $13,040 | +2% |
Climate and equipment sizing in Colorado Springs
Permits in Colorado Springs
A residential permit for this work typically runs around $550 in Colorado. Permit cost is rarely included in a contractor quote, so budget it separately and confirm scope with the Colorado Springs building department before work begins.
Hiring in Colorado Springs
Get three written, itemised quotes from licensed and insured contractors, each specifying the same scope and grade of material. Ask for local references and check the licence is current in Colorado.
Frequently asked questions
How much does heat pump cost in Colorado Springs?
In 2026, heat pump costs $5,384 to $12,726 in Colorado Springs. For an average 1,800 sq ft home, the installed total typically lands between $5,384 and $12,726.
Is Colorado Springs more expensive than the rest of Colorado?
No. Colorado Springs actually runs about 2% below the Colorado average. Local construction wages are $29.69/hr against $31.67/hr statewide.
Do I need a permit in Colorado Springs?
Most work of this type and value requires a permit. Budget around $550 in Colorado and allow extra time for review in metro jurisdictions.
How do I compare quotes in Colorado Springs?
Get three written, itemised quotes covering identical scope and materials. A bid far below the others usually signals a reduced specification rather than better value.
Nearby markets
Open the full heat pump calculator →