Chain Link Fence costs $11.46 to $28.64 per linear ft in Atlanta in 2026. For a 150-foot run, expect $1,718 – $4,296 installed, typically near $3,007. That is about 2% above the Georgia average.
Atlanta chain link fence calculator
Planning estimate. Wage index applies to the labor share only; materials held at national prices. Get three written quotes.
Why Atlanta runs above the Georgia average
Construction wages in Atlanta average $28.26 per hour against $27.12 statewide, so labor-heavy work prices above the Georgia norm here.
Labor is about 45% of the installed cost on this type of work, and it is the part that actually moves between markets. Materials are priced by national manufacturers and barely shift, which is why the gap between metros is narrower than wage differences alone suggest.
Chain Link Fence cost by project size in Atlanta
| Project size | Atlanta range | Typical |
|---|---|---|
| 50 ft | $573 – $1,432 | $1,002 |
| 100 ft | $1,146 – $2,864 | $2,005 |
| 150 ft | $1,718 – $4,296 | $3,007 |
| 200 ft | $2,291 – $5,728 | $4,010 |
| 250 ft | $2,864 – $7,160 | $5,012 |
| 300 ft | $3,437 – $8,592 | $6,014 |
| 400 ft | $4,582 – $11,456 | $8,019 |
| 500 ft | $5,728 – $14,320 | $10,024 |
Where the money goes
For a 150-foot run in Atlanta at roughly $3,007, a typical bill splits like this:
| Line item | Share | Cost |
|---|---|---|
| Labor | 45% | $1,353 |
| Materials | 41% | $1,233 |
| Site prep & equipment | 8% | $241 |
| Overhead, disposal & finishing | 6% | $180 |
Atlanta compared with other Georgia markets
| Area | Cost per linear ft | vs Atlanta |
|---|---|---|
| Augusta | $11.21 – $28.02 | −2% |
| Savannah | $11.18 – $27.95 | −2% |
| Columbus | $10.64 – $26.60 | −7% |
| Gainesville | $11.13 – $27.81 | −3% |
| Georgia average | $11.26 – $28.15 | −2% |
Ground conditions and code in Atlanta
Permits in Atlanta
A residential permit for this work typically runs around $400 in Georgia. Permit cost is rarely included in a contractor quote, so budget it separately and confirm scope with the Atlanta building department before work begins.
Hiring in Atlanta
Get three written, itemised quotes from licensed and insured contractors, each specifying the same scope and grade of material. Ask for local references and check the licence is current in Georgia.
Frequently asked questions
How much does chain link fence cost in Atlanta?
In 2026, chain link fence costs $11.46 to $28.64 per linear ft in Atlanta. For a 150-foot run, the installed total typically lands between $1,718 and $4,296.
Is Atlanta more expensive than the rest of Georgia?
Yes. Atlanta runs about 2% above the Georgia average, because local construction wages ($28.26/hr) sit above the statewide figure of $27.12/hr.
Do I need a permit in Atlanta?
Most work of this type and value requires a permit. Budget around $400 in Georgia and allow extra time for review in metro jurisdictions.
How do I compare quotes in Atlanta?
Get three written, itemised quotes covering identical scope and materials. A bid far below the others usually signals a reduced specification rather than better value.
Nearby markets
Open the full chain link fence calculator →