Vinyl Fence costs $29.64 to $63.52 per linear ft in Rochester in 2026. For a 150-foot run, expect $4,446 – $9,528 installed, typically near $6,987. That is essentially in line with the Minnesota average.
Rochester vinyl fence calculator
Planning estimate. Wage index applies to the labor share only; materials held at national prices. Get three written quotes.
How Rochester compares with the rest of Minnesota
Construction wages in Rochester average $35.81 per hour against $36.13 statewide, so pricing tracks the Minnesota norm closely.
Labor is about 42% of the installed cost on this type of work, and it is the part that actually moves between markets. Materials are priced by national manufacturers and barely shift, which is why the gap between metros is narrower than wage differences alone suggest.
Vinyl Fence cost by project size in Rochester
| Project size | Rochester range | Typical |
|---|---|---|
| 50 ft | $1,482 – $3,176 | $2,329 |
| 100 ft | $2,964 – $6,352 | $4,658 |
| 150 ft | $4,446 – $9,528 | $6,987 |
| 200 ft | $5,928 – $12,704 | $9,316 |
| 250 ft | $7,411 – $15,880 | $11,645 |
| 300 ft | $8,893 – $19,056 | $13,974 |
| 400 ft | $11,857 – $25,408 | $18,632 |
| 500 ft | $14,821 – $31,760 | $23,290 |
Where the money goes
For a 150-foot run in Rochester at roughly $6,987, a typical bill splits like this:
| Line item | Share | Cost |
|---|---|---|
| Labor | 42% | $2,935 |
| Materials | 44% | $3,074 |
| Site prep & equipment | 8% | $559 |
| Overhead, disposal & finishing | 6% | $419 |
Rochester compared with other Minnesota markets
| Area | Cost per linear ft | vs Rochester |
|---|---|---|
| Minneapolis | $30.40 – $65.14 | +3% |
| Duluth | $29.11 – $62.39 | −2% |
| St. Cloud | $29.52 – $63.26 | 0% |
| Mankato | $29.20 – $62.56 | −2% |
| Minnesota average | $29.76 – $63.78 | 0% |
Ground conditions and code in Rochester
Permits in Rochester
A residential permit for this work typically runs around $500 in Minnesota. Permit cost is rarely included in a contractor quote, so budget it separately and confirm scope with the Rochester building department before work begins.
Hiring in Rochester
Get three written, itemised quotes from licensed and insured contractors, each specifying the same scope and grade of material. Ask for local references and check the licence is current in Minnesota.
Frequently asked questions
How much does vinyl fence cost in Rochester?
In 2026, vinyl fence costs $29.64 to $63.52 per linear ft in Rochester. For a 150-foot run, the installed total typically lands between $4,446 and $9,528.
Is Rochester more expensive than the rest of Minnesota?
Not meaningfully. Rochester prices track the Minnesota average closely.
Do I need a permit in Rochester?
Most work of this type and value requires a permit. Budget around $500 in Minnesota and allow extra time for review in metro jurisdictions.
How do I compare quotes in Rochester?
Get three written, itemised quotes covering identical scope and materials. A bid far below the others usually signals a reduced specification rather than better value.
Nearby markets
Open the full vinyl fence calculator →