Privacy Fence costs $26.33 to $63.19 per linear ft in Philadelphia in 2026. For a 150-foot run, expect $3,950 – $9,479 installed, typically near $6,714. That is about 4% above the Pennsylvania average.
Philadelphia privacy fence calculator
Planning estimate. Wage index applies to the labor share only; materials held at national prices. Get three written quotes.
Why Philadelphia runs above the Pennsylvania average
Construction wages in Philadelphia average $34.78 per hour against $31.93 statewide, so labor-heavy work prices above the Pennsylvania norm here.
Labor is about 50% of the installed cost on this type of work, and it is the part that actually moves between markets. Materials are priced by national manufacturers and barely shift, which is why the gap between metros is narrower than wage differences alone suggest.
Privacy Fence cost by project size in Philadelphia
| Project size | Philadelphia range | Typical |
|---|---|---|
| 50 ft | $1,317 – $3,160 | $2,238 |
| 100 ft | $2,633 – $6,319 | $4,476 |
| 150 ft | $3,950 – $9,479 | $6,714 |
| 200 ft | $5,266 – $12,639 | $8,952 |
| 250 ft | $6,583 – $15,798 | $11,190 |
| 300 ft | $7,899 – $18,958 | $13,428 |
| 400 ft | $10,532 – $25,277 | $17,905 |
| 500 ft | $13,165 – $31,596 | $22,381 |
Where the money goes
For a 150-foot run in Philadelphia at roughly $6,714, a typical bill splits like this:
| Line item | Share | Cost |
|---|---|---|
| Labor | 50% | $3,357 |
| Materials | 36% | $2,417 |
| Site prep & equipment | 8% | $537 |
| Overhead, disposal & finishing | 6% | $403 |
Philadelphia compared with other Pennsylvania markets
| Area | Cost per linear ft | vs Philadelphia |
|---|---|---|
| Pittsburgh | $25.25 – $60.60 | −4% |
| Lancaster | $24.44 – $58.65 | −7% |
| Allentown | $25.43 – $61.03 | −3% |
| Harrisburg | $25.43 – $61.03 | −3% |
| Pennsylvania average | $25.20 – $60.48 | −4% |
Ground conditions and code in Philadelphia
Permits in Philadelphia
A residential permit for this work typically runs around $500 in Pennsylvania. Permit cost is rarely included in a contractor quote, so budget it separately and confirm scope with the Philadelphia building department before work begins.
Hiring in Philadelphia
Get three written, itemised quotes from licensed and insured contractors, each specifying the same scope and grade of material. Ask for local references and check the licence is current in Pennsylvania.
Frequently asked questions
How much does privacy fence cost in Philadelphia?
In 2026, privacy fence costs $26.33 to $63.19 per linear ft in Philadelphia. For a 150-foot run, the installed total typically lands between $3,950 and $9,479.
Is Philadelphia more expensive than the rest of Pennsylvania?
Yes. Philadelphia runs about 4% above the Pennsylvania average, because local construction wages ($34.78/hr) sit above the statewide figure of $31.93/hr.
Do I need a permit in Philadelphia?
Most work of this type and value requires a permit. Budget around $500 in Pennsylvania and allow extra time for review in metro jurisdictions.
How do I compare quotes in Philadelphia?
Get three written, itemised quotes covering identical scope and materials. A bid far below the others usually signals a reduced specification rather than better value.
Nearby markets
Open the full privacy fence calculator →