Privacy Fence costs $25.38 to $60.91 per linear ft in Eugene in 2026. For a 150-foot run, expect $3,807 – $9,137 installed, typically near $6,472. That is about 6% below the Oregon average.
Eugene privacy fence calculator
Planning estimate. Wage index applies to the labor share only; materials held at national prices. Get three written quotes.
Why Eugene runs below the Oregon average
Construction wages in Eugene average $32.36 per hour against $36.54 statewide. Eugene sits below the Oregon average because the statewide figure is pulled up by higher-wage metros elsewhere in the state.
Labor is about 50% of the installed cost on this type of work, and it is the part that actually moves between markets. Materials are priced by national manufacturers and barely shift, which is why the gap between metros is narrower than wage differences alone suggest.
Privacy Fence cost by project size in Eugene
| Project size | Eugene range | Typical |
|---|---|---|
| 50 ft | $1,269 – $3,046 | $2,157 |
| 100 ft | $2,538 – $6,091 | $4,315 |
| 150 ft | $3,807 – $9,137 | $6,472 |
| 200 ft | $5,076 – $12,183 | $8,629 |
| 250 ft | $6,345 – $15,228 | $10,787 |
| 300 ft | $7,614 – $18,274 | $12,944 |
| 400 ft | $10,152 – $24,365 | $17,259 |
| 500 ft | $12,690 – $30,456 | $21,573 |
Where the money goes
For a 150-foot run in Eugene at roughly $6,472, a typical bill splits like this:
| Line item | Share | Cost |
|---|---|---|
| Labor | 50% | $3,236 |
| Materials | 36% | $2,330 |
| Site prep & equipment | 8% | $518 |
| Overhead, disposal & finishing | 6% | $388 |
Eugene compared with other Oregon markets
| Area | Cost per linear ft | vs Eugene |
|---|---|---|
| Portland | $28.19 – $67.65 | +11% |
| Salem | $25.85 – $62.03 | +2% |
| Bend | $25.89 – $62.13 | +2% |
| Medford | $25.45 – $61.09 | 0% |
| Oregon average | $27.04 – $64.89 | +7% |
Ground conditions and code in Eugene
Permits in Eugene
A residential permit for this work typically runs around $600 in Oregon. Permit cost is rarely included in a contractor quote, so budget it separately and confirm scope with the Eugene building department before work begins.
Hiring in Eugene
Get three written, itemised quotes from licensed and insured contractors, each specifying the same scope and grade of material. Ask for local references and check the licence is current in Oregon.
Frequently asked questions
How much does privacy fence cost in Eugene?
In 2026, privacy fence costs $25.38 to $60.91 per linear ft in Eugene. For a 150-foot run, the installed total typically lands between $3,807 and $9,137.
Is Eugene more expensive than the rest of Oregon?
No. Eugene actually runs about 6% below the Oregon average. Local construction wages are $32.36/hr against $36.54/hr statewide.
Do I need a permit in Eugene?
Most work of this type and value requires a permit. Budget around $600 in Oregon and allow extra time for review in metro jurisdictions.
How do I compare quotes in Eugene?
Get three written, itemised quotes covering identical scope and materials. A bid far below the others usually signals a reduced specification rather than better value.
Nearby markets
Open the full privacy fence calculator →