Privacy Fence costs $24.21 to $58.09 per linear ft in Phoenix in 2026. For a 150-foot run, expect $3,631 – $8,714 installed, typically near $6,172. That is essentially in line with the Arizona average.
Phoenix privacy fence calculator
Planning estimate. Wage index applies to the labor share only; materials held at national prices. Get three written quotes.
How Phoenix compares with the rest of Arizona
Construction wages in Phoenix average $29.42 per hour against $28.86 statewide, so pricing tracks the Arizona norm closely.
Labor is about 50% of the installed cost on this type of work, and it is the part that actually moves between markets. Materials are priced by national manufacturers and barely shift, which is why the gap between metros is narrower than wage differences alone suggest.
Privacy Fence cost by project size in Phoenix
| Project size | Phoenix range | Typical |
|---|---|---|
| 50 ft | $1,210 – $2,905 | $2,057 |
| 100 ft | $2,421 – $5,809 | $4,115 |
| 150 ft | $3,631 – $8,714 | $6,172 |
| 200 ft | $4,841 – $11,619 | $8,230 |
| 250 ft | $6,051 – $14,523 | $10,287 |
| 300 ft | $7,262 – $17,428 | $12,345 |
| 400 ft | $9,682 – $23,238 | $16,460 |
| 500 ft | $12,103 – $29,047 | $20,575 |
Where the money goes
For a 150-foot run in Phoenix at roughly $6,172, a typical bill splits like this:
| Line item | Share | Cost |
|---|---|---|
| Labor | 50% | $3,086 |
| Materials | 36% | $2,222 |
| Site prep & equipment | 8% | $494 |
| Overhead, disposal & finishing | 6% | $370 |
Phoenix compared with other Arizona markets
| Area | Cost per linear ft | vs Phoenix |
|---|---|---|
| Tucson | $23.14 – $55.53 | −4% |
| Prescott Valley | $23.34 – $56.03 | −4% |
| Lake Havasu City | $22.80 – $54.73 | −6% |
| Yuma | $22.70 – $54.48 | −6% |
| Arizona average | $23.99 – $57.57 | −1% |
Ground conditions and code in Phoenix
Permits in Phoenix
A residential permit for this work typically runs around $450 in Arizona. Permit cost is rarely included in a contractor quote, so budget it separately and confirm scope with the Phoenix building department before work begins.
Hiring in Phoenix
Get three written, itemised quotes from licensed and insured contractors, each specifying the same scope and grade of material. Ask for local references and check the licence is current in Arizona.
Frequently asked questions
How much does privacy fence cost in Phoenix?
In 2026, privacy fence costs $24.21 to $58.09 per linear ft in Phoenix. For a 150-foot run, the installed total typically lands between $3,631 and $8,714.
Is Phoenix more expensive than the rest of Arizona?
Not meaningfully. Phoenix prices track the Arizona average closely.
Do I need a permit in Phoenix?
Most work of this type and value requires a permit. Budget around $450 in Arizona and allow extra time for review in metro jurisdictions.
How do I compare quotes in Phoenix?
Get three written, itemised quotes covering identical scope and materials. A bid far below the others usually signals a reduced specification rather than better value.
Nearby markets
Open the full privacy fence calculator →